特性：　 ＊ 噴霧方式采用伯努特原理取吸鹽水而后霧化，霧化程度均勻，絕無阻塞結晶之現象,可確保連續測試之標準； ＊ 噴嘴采用臺灣特殊玻璃噴嘴制成，可調整噴霧量之大小及噴出角度； ＊ 試驗室藍架采平面分度架，可任意調整角度，四面落霧及受霧方面完全一致，試驗片放置數量多； ＊ 加水系統采用自動加水補充系統，水位過低時自動補充； ＊ 附雙重超溫保護，水位不足警示確保使用安全。     FEATURES: ＊ Demisting mode adopts Bernoulli Principle to absorb brinethen mist it. Degree of misting is even, without blocking crystallizationcan ensure the standard of continuous testing; ＊ The nozzle is made of special glass from Taiwancan adjust volume of mistingangle of spraying; ＊ Lab rack adopts plane graduated rack that is able to adjust angle at random. On four sides, mist fallingreceiving directions are completely the samenumber of placed testing sheets are great; ＊ Water adding system adopts automatic water addingreplenishing systemautomatic replenish is made as the water level is too low. ＊ It is attached with double super temperature protection that send warning as the water level is under standard level, so as to ensure safety of use.

Model 型 號 SH-60 SH-90 Internal Size W×H×D 內箱尺寸 (cm) 60×40×45 90×50×60 External Size W×H×D 外箱尺寸 (cm) 125×105×91 155×121×106 Temp. Range 溫度范圍 Chamber 試驗室 Room temp. ～50℃, ±1℃ Air 飽和空氣桶 Room temp. ～63℃, ±1℃

執行標準 GB 10587-89鹽霧試驗箱技術條件 滿足標準 IEC68-2-11_試驗方法Ka_監霧 IEC68-2-52_試驗方法Kb：循環式鹽霧 MIL-STD-810F-509.4 鹽霧 JIS C60068-2-11-1989 試驗Ka:鹽霧 JESD22-A107B-2004 鹽霧試驗 GB/T 2423.17-1993 鹽霧試驗方法