產品特色：

a.無段調整UV燈燈管輸出照度

b.世界首創UV燈燈管照度衰減自動抵補調整，免去手動校正與使用校正燈管。

c.USB隨身碟接口記錄多軌溫濕度電壓電流曲線文件(7軌物理量記錄)。

d.具備伺服加濕系統，有效控制測試區光源發熱負載。

e.燈管降溫用水其水質、水溫偵測。

f.UV燈燈管自行研發設計掌握關鍵技術。

g. 在短短的幾天或幾周內，Q8可再現在幾個月甚至幾年的戶外使用所出現的破壞。

規范要求：

a.滿足規范要求，試驗結束方式可單選或復選[照射累積時間]與[照射累積量]。

b.雨淋水溫符合規范要求可設定。

c.符合ISO、ASTM、 DIN、JIS、SAE、BS、ANSI、GM、U.S.GOVT等標準和國標。

安全保護：

a.試驗結束待測品回常溫保護機制

b.試驗機臺具備35點內外安全保護偵測(內部14點，外部31點)

控制器創新：

a.動態實時變化程序編輯曲線

b.溫濕度設定條件防呆保護

c.機臺重新來電試驗曲線不中斷

d.AI(人工智能)+Fuzzy(模糊控制)技術

e.繁簡體中文、英文三種畫面語系切換

f.控制系統實時顯示多軌溫濕度電壓電流試驗曲線[溫度、濕度、黑球溫度、水溫、
  燈管電壓、燈管電流、燈管照度]。

型號 Model

UV3

UV2

UV1

UV 照射 Exposure

●

●

●

冷凝 Condensation

●

●

●

光照控制 Irradiancs Control

●

●

可調光線 Adjustable irradiance

●

●

噴水 Water Spray

●

熱沖擊 Thermal Shock

●

自動偵路 Self-diagnostics

●

●

●

燈泡數量 Lamp Q'ty

紫外線燈管 8 支，備品 4 支 Ultravloiet lamp 6pcs, spares 4 pcs

記錄器 Recorder

選配 (Optional)

輻射計 CR-10 Calibration Radiometer

選配 (Optional)

UV 溫度 Temp

50 ℃ -75 ℃

冷凝溫度 Condensation Temp

40 ℃ -60 ℃

測試容量 Test Capacity

48pcs 片/se  spray( 75 x 150m m )

50pcs片/basic ( 75 x 150m m )

水涼及耗量 Water

蒸餾水每分鐘 蒸餾水每日 8 公升

體積 Dimension(W x D x H)

137 x 53 x 136cm

重量 Weight

136kg

電源 Power

1 ψ ， 120V/60Hz,16A or 230V/50Hz, 9A,1800W(max)

通用

·                     ISO 4892-1 Plastics- Methods of exposure to laboratory light sources-Part 1: General Guidance

·                     ASTM G-151, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

·                     ASTM G-154, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Non-Metallic Materials

·                     British Standard BS 2782: Part 5, Method 540B (Methods of Exposure to Lab Light Sources)

·                     SAE J2020, Accelerated Exp. of Automotive Exterior Materials Using a Fluorescent UV/Condensation Apparatus

·                     JIS D 0205, Test Method of Weatherability for Automotive Parts (Japan)

·                     GB/T 16422.1，塑料實驗室光源暴露試驗方法 第1部分：總則

涂料

·                     ISO 11507, Paints & varnishes-Exposure of coatings to artificial weathering-Exposure to fluorescent UV and water

·                     ISO 20340, Paints & varnishes –Performance requirements for protective paint systems for offshore and
     related structures

·                     ASTM D-3794, Standard Guide for Testing Coil Coatings

·                     ASTM D-4587, Standard Practice for Light/Water Exposure of Paint

·                     US Government, FED-STD-141B

·                     US Govt., Federal Specification TT-E-489H, Enamel, Alkyd, Gloss, Low VOC Content

·                     US Govt., Federal Specification TT-E-527D, Enamel, Alkyd, Lusterless, Low VOC Content

·                     US Govt., Federal Specification TT-E-529G, Enamel, Alkyd, Semigloss, Low VOC Content

·                     US Govt., Federal Specification TT-P-19D Paint, Latex, Acrylic Emulsion, Ext. Wood & Masonry

·                     NACE Standard TM-01-84 Procedures for Screening Atmospheric Surfaced coatings

·                     GM4367M Topcoat Materials - Exterior

·                     GM 9125P Laboratory Accelerated Exposure of Automotive Material

·                     Korean Standard M5982-1990, Test Method for Accelerated Weathering

·                     Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps

·                     Israeli Standard No. 330, Steel Windows

·                     Israeli Standard No. 385, Plastic Windows

·                     Israeli Standard No. 935, Road Marking Paint

·                     Israeli Standard No. 1086, Aluminum Windows

·                     NISSAN M0007, Fluorescent UV/Condensation Test

·                     JIS K 5600-7-8, Testing Methods for Paints

·                     MS 133: Part F16, Methods of Test for Paints and Varnishes: Part F16: Exposure of Coatings to Artificial Weathering- Exposure to Fluorescent UV and Water (ISO 11507)

·                     NBR-15.380 Paints for buildings–Methods for performance evaluation of paints for non-industrial buildings – Resistance to UV irradiation/water vapor condensation, by accelerated test

·                     prEN 927-6 Paints & varnishes–Coating materials and coating systems for exterior wood – Pt. 6: Exposure of wood coatings to artificial weathering using fluorescent UV and water

·                     GB/T 12967.4，鋁及鋁合金陽極氧化 著色陽極 氧化膜耐紫外光性能的測定

紡織品

·                     AATCC Test Method 186, Weather Resistance: UV Light and Moisture Exposure

·                     ACFFA Test Method for Colorfastness of Vinyl Coated Polyester Fabrics

印刷油墨

·                     ASTM F1945, Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

橡膠

? GB/T 16585，硫化橡膠人工氣候老化(熒光紫外燈)試驗方法

電工電子產品

? GB/T 19394，光伏(PV)組件紫外試驗

type the link here

粘合劑和密封劑

·                     ASTM C 1501, Standard Test Method For Color Stability of Building Construction Sealants as Determined byLaboratory Accelerated Weathering Procedures

·                     ASTM C-1184, Specification for Structural Silicone Sealants

·                     ASTM C-1442, Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

·                     ASTM D-904, Standard Practice for Exposure of Adhesive Specimens to Artificial Light

·                     ASTM D-5215, Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

·                     American Plywood Assn., Approval Procedures for Synthetic Patching Materials, Section 6

·                     Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps

塑料

·                     ISO 4892 Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps

·                     DIN 53 384, Testing of plastics, Artificial Weathering and Exposure to Artificial Light

·                     Spanish Standard UNE 53.104 (Stability of Plastics Materials Exposed to Simulated Sunlight)

·                     Israeli Standard No. 385, Plastic Windows

·                     JIS K 7350, Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps

·                     ASTM D-1248, Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

·                     ASTM D-4329, Standard Practice for Light/Water Exposure of Plastics

·                     ASTM D-4674, Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor
     Fluorescent Lighting and Window-Filtered Daylight

·                     ASTM D-5208, Standard Practice for Exposure of Photodegradable Plastics

·                     ASTM D-6662,  Standard Specification for Plastic Lumber Decking Boards

·                     ANSI C57.12.28 Specification for Accelerated Weathering of Padmounted Equipment Enclosure Integrity

·                     ANSI, A14.5 Specification for Accelerated Weathering of Portable Reinforced Plastic Ladders

·                     Edison Electrical Inst. Specification for Accelerated Weathering of Padmounted Equip. Enclosure Integrity

·                     Wisconsin Electric Power Specification for Polyethylene Signs

·                     GB/T 18950，橡膠和塑料軟管 靜態下耐紫外線性能測定

·                     GB/T 16422.3，塑料實驗室光源暴露試驗方法 第3部分：熒光紫外燈

屋頂材料

·                     ASTM D-4799, Test Method for Accelerated Weathering of Bituminous Roofing Materials

·                     ASTM D-4811, Standard Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing

·                     ASTM D-3105, List of Test Methods for Elastomeric and Plastomeric Roofing & Waterproofing

·                     ASTM D-4434, Standard Specification for PVC Sheet Roofing

·                     ASTM D-5019, Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane

·                     ANSI/RMA IPR-1-1990 Req. for Non-Reinforced Black EPDM Sheet for Roofing Membrane

·                     ANSI/RMA IPR-2-1990 Req. for Fabric-Reinforced Black EPDM Sheet for Roofing Membrane

·                     ANSI/RMA IPR-5-1990 Req. for Non-Reinforced Non-Black EPDM Sheet for Roofing Membrane

·                     ANSI/RMA IPR-6-1990 Req. for Fabric-Reinforced Non-Black EPDM Sheet for Roofing Membrane

·                     British Standard BS 903: Part A54 Annex A & D, Methods of Testing Vulcanized Rubber

·                     CGSB-37.54-M, Canadian General Standards Board Spec. for PVC Roofing & Waterproofing Membrane

·                     DIN EN  534, Corrugated bitumen sheets

·                     EOTA TR 010, Exposure procedure for artificial weathering

·                     RMA Specification for Reinforced Non-Vulcanized Chlorosulfonated Polyethylene Sheet for Roofing Membrane

復合材料

·                     Israeli Standard No. 385, Anodic Coatings on Aluminum